28
29
Raise the blade to maximum height as indicated.
Be sure to protect your hands as the blade is very
sharp.
ASSEMBLY
ASSEMBLY
Look inside and identify the retaining plate with bolt
as shown. Loosen bolt and in turn the plate by turn-
ing the bolt anti-clockwise. Do not remove entirely.
It is recommended to use a 10mm ratchet spanner
as the bolt and plate are in a tight space.
3
LOOSEN RETAINING BOLT & PLATE
4
ATTACH RIVING KNIFE
5
ADJUST RIVING KNIFE
3-5mm
Once the bolt and plate are loose enough, slide the
riving knife into the slots as indicated. Tighten the
bolt, the plate will hold the riving knife against the
body of the machine.
You can adjust the riving knife as required by
loosening the bolt and plate and positioning as
required. The edge of the blade should be between
3–5mm from the teeth of the blade. With the
adjustment complete, reinstall the previously
removed access panel. Check the riving knife at
regular intervals for wear or damage.
WARNING!
When working directly with the blade it is always recommended to use an appropriate pair of work/safety gloves
1
2
LOCATE & REMOVE ACCESS PANEL
RAISE THE BLADE
Identify the access panel as shown. Unscrew the
access panel screw in the normal way. there is a
retaining clip on the screw so it won't come out of
the panel completely. Once the panel is loose,
remove it.