Model V10 Service
Bulletin HY14-2701-M1/US - TORO Specific
Revision: 01-01-2005
6
Procedures for Removing Model V10 Spool Seals
Handle End
Positioner End
1. Remove the handle and positioner hard-
ware from the valve section.
2. Insert a punch or screwdriver through the
spool clevis. While watching the positioner
end, slowly pull the spool toward the handle
end. Stop when the spool seal is exposed
as shown.
3. Using a small seal pick, carefully
remove the spool seal from the positioner
end.
4. Push the spool back through the housing
and out the positioner end.
5. Remove the remaining spool seal with
the seal pick.
A
B
A
B
A
B
Figure
3
. Model V10 Spool Seal Removal
