28
Converting from brush cutter to string trimmer
To convert from the brush cutter to the string trimmer, remove the cutter blade and cupped washer, and then
assemble the string head assembly.
1. Assemble the string trimmer shield (12), align the three hooks in guard to the holes in the brush cutter
shield (8), and give trimmer shield a upward strength to meet the hook hole in the cutter guard. It will
be ok when you hear an obviously voice.
Note: Must sure the connection between these two shields are so effective and reliable.
2. Align the slot in the flanged washer with the slot in the gear head.
3. Place the gear head allen key (10) through the slot in the flanged washer and gear head.
4. Remove the left-hand nut assembly.
5. Remove the flanged washer and retain it for the later use.
6. Assemble the string head assembly to the gear head shaft.
Note:
a. Store the Blade, left-hand nut and allen key, spanner for later use.
b. Must assemble the trimmer shield (12) before you use the trimmer function.
c. No need to take out the trimmer shield (12) when you converting from string trimmer to brush cutt
er.
、