Park 9696093 Скачать руководство пользователя страница 12

3

4

- Store fuel in containers specifically designed for this purpose;
- refuel outdoors only and do not smoke while refueling;
- add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while the

engine is running or when the engine is hot;

- if petrol is spilled, do not attempt to start the engine but move the machine away from the area of

spillage and avoid creating any source of ignition until petrol vapours have dissipated;

- replace all fuel tank and container caps securely;

Replace faulty silencers;
Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are
not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance;

Operation

Do not operate the engine in a confined space where dangerous carbon monoxide fumes can
collect;

WARNING: Do not use the lawnmower when there is a risk for lighting.

It is recommended to limit the duration of operation, in order to minimize the risks from noise and
vibration.
Be careful when using the lawnmower in slopes and near drop-offs, ditches or embankments.
Mow only in daylight or in good artificial light;
Avoid operating the equipment in wet grass, where feasible;
Always be sure of your footing on slopes;
Walk, never run;
For wheeled rotary machines, mow across the face of slopes, never up and down;
Exercise extreme caution when changing direction on slopes;
Do not mow excessively steep slopes;
Use extreme caution when reversing or pulling the lawn mower towards you;
Stop the blade(s) if the lawn mower has to be tilted for transportation when crossing surfaces other
than grass, and when transporting the lawn mower to and from the area to be mowed;
Never operate the lawn mower with defective guards, or without safety devices, for example
deflectors and/or grass catchers, in place;
Caution: The lawnmower shall not be operated without either the entire grass catcher or
self-closing discharge opening guard in place.
Do not change the engine governor settings or overspeed the engine;
Do not alter or tamper with any sealed adjustment for the engine speed control.
The lawnmower safety systems or features shall not be tampered with or disabled.
Disengage all blades and drive clutches before starting the engine;
Start the engine carefully according to instructions and with feet well away from the blade(s);
Do not tilt the lawn mower when starting the engine;
Do not start the engine when standing in front of the discharge chute;
Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all
times;
Never pick up or carry a lawn mower while the engine is running;
Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to
a complete stop and, where a key is fitted remove the key:

- Before clearing blockages or unclogging chute;
- Before checking, cleaning or working on the lawn mower;
- After striking a foreign object. Inspect the lawnmower for damage and make repairs before

restarting and operating the lawn mower;

- If lawn mower starts to vibrate abnormally (check immediately);

Stop the engine, make sure that all moving parts have come to a complete stop and, where a key
is fitted remove the key:

- Whenever you leave the lawn mower;
- Before refueling;

Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off
valve, turn the fuel off at the conclusion of mowing;

Maintenance and storage

Keep all nuts, bolts and screws tight to be sure the equipment are in safe working condition;
Never store the equipment with petrol in the tank inside a building where fumes can reach an
open flame or spark;
Allow the engine to cool before storing in any enclosure; Clean and maintain the lawnmower
before storage.
To reduce the fire hazard, keep the engine, silencer, battery compartment and petrol storage area
free of grass, leaves, or excessive grease;
Check the grass catcher frequently for wear or deterioration;
Replace worn or damaged parts for safety;
If the fuel tank has to be drained, this should be done outdoors.
Improper maintenance, use of non-conforming replacement components, or the removal or
modification of safety components can damage the lawnmower and injure the operators seriously.
Only use the recommended blades and spare parts by the manufacturer. The use of non-genuine
parts can damage the machine and injure the operators. Keep the lawnmower in good working
condition.
If the blade stopping device doesn't work, please contact service center for help.

Warning: Do not touch rotating blade.

Warning: Refuel in a well ventilated area with the engine stopped.

3. PARTS DESCRIPTION

1. Starter handle
2. Rope Guide
3. Grass catch
4. Height adjusting lever
5. Deck
6. Sideward flap
7. Oil Cap
8. Spark Plug
9. Fuel cap
10. Cable clamp
11. Locking Lever
12. Choke Lever
13. Self-drive control handle
14. Brake control handle
15. Upper handle Including
A: Spark plug wrench
16. Mulching wedge
17. Side discharge channel
18. Locking mechanism

Fig. 1

Содержание 9696093




















Отзывы: