PARK AUDIO RX Series, Руководство пользователя

Страница: 15 / 20

AMPLIFIER SETUP
DSP settings control is performed via ETHERNET, using personal computer with the
installed NetControl software.The NetControl installation package and user manual can
be downloaded from parkaudio.ua (’’Downloads’’ section on the RX9d amplifier page).
Some DSP engine settings are available in the amplifier system menu.
VOLUME – signal level setting for each
channel.
DELAY – delay setting for each channel.
LOAD PRESET – presets loading from
Preset Library (memory cell 1 ... 92).
Applied to all channels simultaneously.
SET SPEAKER – Speaker presets load-
ing from Speaker Library (memory cells 93
... 190). Applied to all channel separately.
STORE PRESET – current setting store as
user preset into Preset Library ( in one of
the memory cells (1 ... 92).
SETUP IP – amplifier IP address setting.
SELECT INPUT – input mode choise
(analog or digital AES/EBU).
SYSTEM TEMPERATURE – amplifier
temperature.
AMPLIFIER INFO information about –
amplifier.
AMPLIFIER STATE amplifier state –
information. Shows error codes.
Enter the menu by short clicking the encoder knob DSP CONTROL .
Ch1: –80 ... +15dB
1 ... 92
Analog/Digital
CH1: 0 ...1500 ms
CH2: 0 ...1500 ms
CH3: 0 ...1500 ms
CH4: 0 ...1500 ms
1 ... 92
CH1: 93 ... 190
CH2: 93 ... 190
CH3: 93 ... 190
CH4: 93 ...190
STORE PRESET
LOAD PRESET
SETUP IP
SELECT INPUT
VOLUME
DELAY
SET SPEAKER
SYSTEM
TEMPERATURE
AMPLIFIER
INFO
AMPLIFIER
STATE
Ch1: –80 ... +15dB
Ch1: –80 ... +15dB
Ch1: –80 ... +15dB
13
Choose the needed menu item by knob DSP CONTROL rotation.
Current menu item is marked by the arrow cursor (left and right).