PARK AUDIO DX1000T DSP, Руководство пользователя

Страница: 9 / 16

POWER – power switch.
TO SATELLITE LEFT – left satellite channel output.
MAINS IN – power cable socket.
ATTENTION! The mains parameters are indicated below the power cord socket:
– for the amplifiers without PFC: ~230V AC 50/60Hz;
– for the amplifiers with PFC: ~160-250V AC 50/60Hz.
ATTENTION! The power to the amplifier is supplied from single-phase AC power
mains 230 V and ~50/60Hz with protective grounding. To connect the amplifier to a wall
outlet, first insert the power cord into the power cord socket and then plug it into the
wall outlet.
INPUT R – Right Channel input (XLR, balanced).
INPUT L – Left Channel input (XLR, balanced).
POWER LED.
MASTER LEVEL – input level control knob.
SAT PRESET – DSP presets switch for satellites channels.
CLIP/THERMAL – overload / thermal protection LED.
Indicating:
– overload condition, characterized by sound distortion and optoelectronic clip-
limiter active mode;
– thermal protection active condition in case of overheating of the output section.
SUB PRESET – DSP presets switch for subwoofer channels.
SUBWOOFER LEVEL – subwoofer level control knob.
USB – USB port for connection to the PC (personal computer).
THROUGH L – Left Channel line output (XLR male, parallel to Left Channel input).
THROUGH R – Right Channel line output (XLR male, parallel to Left Channel input).
TO SATELLITE LEFT – Right satellite channel output.
7