PARK AUDIO DX1000T DSP, Руководство пользователя

Страница: 13 / 16

11
SPECIFICATION
Output Power *:
– DX1000T DSP 350 W
(subwoofer channel, 8 Ohms)
2 х 350 W
(satellite channels, 8 Ohms)
– DX1400T DSP 700/380W
(subwoofer channel, 4 / 8 Ohms)
2 х 350 W
(satellite channels, 8 Ohms)
– DX2100T- 4 DSP 1400 / 800W
(subwoofer channel, 4 / 8 Ohms)
2 х 350 / 210 W
(satellite channels, 4 / 8 Ohms)
– DX2100T- 8 DSP 1400W
(subwoofer channel, 8 Ohms)
2 х 350 W
(satellite channels, 8 Ohms)
Frequency Response **:
– subwoofer channel 45 – 140 W
(Pnom., Rnom.)
– satellite channel 140 Hz – 20 kHz
(Pnom., Rnom.)
Total
Harmonic Distortion ***
0.05%
(Pnom., Rnom.)
Slew Rate 20V/µs
Damping Factor 200
(200 Hz, 8 Ohms)
Signal-to-Noise Ratio 98 dB
(
unweighted
)
Sensitivity**** 775mV
Power Requirements ~230V, 50/60 Hz
Weight:
– DX1000T
DSP
, DX1400T
DSP
4.3 kg
– DX1000T
DSP PFC
, DX1400T
DSP PFC
4.6 kg
– DX2100T
DSP
4.7 kg
– DX2100T
DSP PFC
5 kg
Dimensions:
– DX1000T
DSP
, DX1400T
DSP
198 mm
(W)
,
438 mm
(H)
,
104 mm
(D)
– DX2100T
DSP
198 mm
(W)
, 474мм
(H)
, 104 мм
(D)
Note.
* At mains:
– ~230 V for amplifiers without power factor correction (PFC);
– ~160-280 V for amplifiers with power factor correction (PFC).
* * The subwoofer and sattelites channels range are determined by the DSP settings.
*** In the operating frequency range of the corresponding channels.
**** Basic setting. Can be changed by DSP.