Park Air Systems T6TR, Пользовательская документация

Страница: 123 / 136

T6TR VHF 50 W Transceiver Page 25 Maintenance
Back to Transceiver
Main Page
To Change the Transceiver’s Profile or Save a Profile
(1) Using a radio to PC Serial Interconnection lead, Park Air part number 17E12600001, connect the
radio’s front panel Headset/Microphone/Diagnostics connector to the PC’s Com Port (note which
Com Port is used).
(2) Run up the VFP software and check that a blank VFP screen (see Fig 4) is displayed.
Fig 4 Blank VFP Screen
(3) At the Menu Bar, click on Serial Port and select Com 1 to Com 99 . The selection must correspond
to the port used to connect to the radio.
(4) Load the required information from the radio, or from a stored file. The required information can
be radio settings, frequency channels, BIT information, or all of these.
To load a previously stored file, select File > Open > All
or, File > Open > Settings
or, File > Open > Channel
or, File > Open > BIT
To load information from the radio, select Radio > Retrieve > All
or, Radio > Retrieve > Settings
or, Radio > Retrieve > Channel
or, Radio > Retrieve > BIT
(5) If required, amend any radio Settings or Channel information.