Park Air Systems T6TR, Пользовательская документация

Страница: 121 / 136

T6TR VHF 50 W Transceiver Page 23 Maintenance
Back to Transceiver
Main Page
Installing the VFP Software
The VFP software is supplied by Park Air on CD-ROM. The software can be run from the Main page or
installed on your PC via Explorer.
To install the software onto your PC:
(1) Using explorer, display the contents of the CD-ROM supplied by Park Air. Identify the file named
S0473VXX.EXE.
(2) Using the mouse, right click on the file S0473VXX.EXE and then select Copy .
(3) Display the Windows desktop. Right click anywhere on the desktop and select Paste .
(4) Check that the VFP icon is shown on the desktop. Reposition the icon as required. The VFP
application is now installed on the PC’s desktop.
VFP Icon
VFP Features
The VFP screen is divided into four main windows: Settings, Channels, BIT and Status Information. Four
colours are used to display text. The colours have the following meanings:
‰
Black indicates a valid parameter that has been accepted by the radio
‰
Red indicates an invalid parameter that has been rejected by the radio, or a BIT failure
‰
Green indicates text that has not yet been downloaded to the radio. Text loaded into the VFP from
a previously stored file, or any text that is manually amended is green until it is downloaded into
the radio; after being downloaded into the radio the text changes to black, or if it is invalid, to red
‰
Blue indicates Help text and is shown in the Status Information window.
The Menu Bar
The menu bar has four categories: File, Serial Port, Radio and Help.
File Has the sub-categories: Open, Save and Print. These sub-categories allow the user to
open previously saved profiles, save a new profile, or print a profile.
A special sub-category: File > Save > Diagnostics should only be used when advised by
Park Air.
Serial Port Opens the Serial Port Settings dialog box. Before the VFP can be used, the appropriate
Com Port (1-99) must be selected to correspond with the PC’s Com Port used for the radio
connection.
Radio Has the sub-categories: Retrieve, Send, Calibrate and Test.
This category allows a radio’s profile to be loaded into the VFP, allows a profile to be
downloaded from the VFP to a radio, calibrates a radio and initiates a BIT test.
Help Provides detail about the VFP software.