background image

LARGE AREA VACUUM

LAV-30

                                                                 

             

 

 

 

                    OPERATING & MAINTENANCE   

INTRODUCTION                                           INSTRUCTIONS

READ THIS BOOK

This operator’s book has important information for the 

use and safe operation of this machine.  Read this 

book carefully before starting the machine.  Keep this 

book and tell all operators to read the book.  If you do 

not follow the instructions, you can cause an injury or 

damage equipment, furniture or buildings.

For additional information refer to the Triple S website 

www.triple-s.com or write to: 

         

Triple S

 

          2 Executive Park Drive

           Billerica, MA  01862

Carefully inspect all components to ensure that there 

is no concealed freight damage.  If such damage is 

discovered, file a “CONCEALED DAMAGE REPORT” 

immediately with the delivering carrier. 

The contents of this manual are based on the latest 

product information available at the time of publica-

tion.  Triple S  reserves the right to make changes or 

improvements to its machines without notice.

       

      

 

FOR YOUR CONVENIENCE, RECORD THIS

IMPORTANT INFORMATION:

MODEL

_______________________________

SERIAL NUMBER

______________________

PART NUMBER

 ________________________

DATE PURCHASED

 ____________________

Содержание LAV-30













Отзывы: