Pari PARI 041, Инструкция по эксплуатации

Страница: 91 / 312

Aerosol data according to ISO 27427
The aerosol characteristics presented in these instructions for
use were determined in accordance with ISO 27427 using Sal-
butamol. If other solutions or suspensions are used for
nebulisation, the aerosol characteristics may differ from the val-
ues shown (particularly if they have greater viscosity).
The following data is based on tests according to a standard
which takes adult breathing patterns as a basis. Therefore,
these figures will probably differ from corresponding figures
that were calculated for populations of children and infants.
Nozzle insert
(blue)
Minimum com-
pressor flow
(3 l/min –
0.6 bar) Nominal com-
pressor flow
(5 l/min –
1.6 bar)
8
Maximum com-
pressor flow
(6 l/min –
1.9 bar)
MMAD [µm]
9
4.7 3.8 3.3
GSD
10
2.19 2.24 2.70
Respirable fraction
[% < 5 µm] 52.3 61.9 60.5
Aerosol fraction
[% < 2 µm] 13.3 22.1 29.4
Aerosol fraction
[% > 2 µm < 5 µm] 39 39.8 31.2
Aerosol fraction
[% > 5 µm] 47.7 38.1 39.5
Aerosol output [ml] 0.35 0.41 0.38
Aerosol output rate
[ml/min] 0.07 0.16 0.18
Residual volume
[ml] (gravimetric) 1.16 1.16 1.10
8) Operation with PARI BOY Classic compressor (Type 130).
9) MMAD = Mass Median Aerodynamic Diameter
10) GSD = Geometric Standard Deviation
– 39 –