5
TROUBLESHOOTING
In the event of faults that are not listed in this chapter, or if the
suggested procedure does not correct the fault, contact the
PARI GmbH Service Center.
Fault
Possible cause
Procedure
The
compressor
does not start
up.
The power adapter
cable is not plugged into
the device properly.
Check that the power
adapter cable is seated
correctly in the
compressor power cord
socket.
The power adapter is
not plugged into the
mains socket properly.
Check that the power
adapter is seated
correctly in the mains
socket.
No medication
is coming out
of the
nebuliser.
The nebuliser nozzle is
blocked.
Clean the nebuliser.
The connection tubing is
not connected properly.
Check that both ends of
the tubing are seated
properly.
The connection tubing is
leaking.
Replace the connection
tubing.
All LEDs are
flashing
There is a temporary
fault in the rechargeable
battery.
Reset the rechargeable
battery as described in
the instructions for use
of the battery.
– 46 –
