TROUBLESHOOTING
SYMPTOM
POSSIBLE CAUSES AND CORRECTION
Motor will not start
Check the ON/OFF switch to ensure that it is switched ‘ON’.
Check the fuel supply.
If a Honda motor is fitted check the crankcase oil level as an oil sensor device is fitted to these motors
which prevents starting and stops the motor when oil level is low
Ensure the spark plug ignition lead is connected
Check the carburettor jet and bowl to ensure they are clean
Motor stops
Check the fuel suppy
Check that the fuel cock is turned on
Check the condition of the air filter
Petrol
Motor lacks power
Check the condition of the air filter
Check the condition of the spark plug
Insufficient vibration
Check for a slipping or a missing vee belt
Check the motor governed speed is 3,500r/min
Machine not moving freely
Check the underside of the plate for a build up of material
These operating instructions summarises our best knowledge of the product, based on the information available at the time. You should read these
operating instructions carefully and consider the information in the context of how the product will beused. Our responsibility for products sold is subject
to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for any losses suffered in connection with
the use of the product whether or not in accordance with any advice, specification, recommendation or information given by it.
© 2020. This publication is copyright. All rights are reserved. Flextool and the Flextool logo are registered trade marks of Parchem Construction
Supplies Pty Ltd.
1300 353 986
flextool.com.au
