SafeAir™ M-200 Pro Installation Guide
3
www.parazero.com
Important Notice
ParaZero’s drone safety system is a risk-mitigation system that aims to lower the impact energy in proper use. ParaZero’s
drone safety system is not intended to eliminate all damages to people or property and Parazero cannot guarantee
this. ParaZero’s drone safety system is a ballistic system that uses a pyrotechnic component. Please note, you must
read, comply with and apply all written information in this manual. The responsibility of proper use of the drone safety
system is on the user itself.
Copyright © 2020 ParaZero Drone Safety Systems. All rights reserved.
All intellectual property rights in this publication are owned by ParaZero Drone Safety Systems and protected by
applicable copyright laws and international treaty provisions. ParaZero Drone Safety Systems retains all rights not
expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative
work without prior written approval by ParaZero Drone Safety Systems. All other trademarks are the property of their
respective owners. Other company and brand products and service names are trademarks or registered trademarks
of their respective holders
.
Document Information
SafeAir M-200 Pro Installation Guide for systems equipped with electronic TerminateAir
Number of pages: 25
Last update: April 4, 2021
Version: 1.10
Contact Information
Tel – +972-36885252
30 Dov Hoz
Kiryat Ono, Israel 5555626
About This Guide
This guide describes the installation of the ParaZero SafeAir M-200 Pro drone safety system that is
Compatible with the following Matrice versions:
Matrice 200
Matrice 200 V2
Matrice 210
Matrice 210 V2
Matrice 210 RTK
Matrice 210 RTK V2 drone.