SafeAir ASTM unlock manual v1.1
13.
Check the “Trigger channel” box:
14.
Press the “Apply” button, the system will restart:
15.
After the SafeAir device is restarted, its LED will appear as flashing yellow. This means
that it is now waiting for the remote control, but the channel is not active. Turn the
remote control on. The remote control LED should turn green, as well as the receiver
LED. The SafeAir device LED should turn blue.
16.
The system is properly configured. The SafeAir device may now be also triggered
manually by the RC signal. In order the manually trigger the system, press and hold the
RC Trigger switch until the LED turns red accompanied by three beeps. The RC keeps
sending a trigger signal for 3 seconds after the release of the Trigger switch.
