I179EN - 1021
16/16
PARATRONIC - Rue des Genêts - Zone Industrielle - 01600 REYRIEUX - FRANCE
Tel.: +33 (0)4 74 00 12 70 – Fax: +33 (0)4 74 00 02 42 - E-Mail: [email protected] - Web:
http://www.paratronic.com
6.10 MOUNTING THE LH(C/M) ON-SITE:
The LH(C/M) can be fitted in the drilling hole in three ways:
- Directly into the drilling hole tube if the dimensions of the tube allow it (50mm < diameter <
75mm).
The body of the LH(C/M) (diam. 50mm) is then inserted into the drilling hole. The LH(C/M) head
(diam. 79mm) then rests on the edge of the tube.
- Suspended on the suspension cable supplied as standard.
- Using the bracket (option ref.: “LH_EQUERRE”).
The LH_EQUERRE is then mounted according to the
option chosen:
Directly inserted onto the rim of
the tube and fastened by
the “screw-handle” provided for
this purpose.
Along a wall using screws or
bolts through two holes provided
for this purpose.
The specifications described in this document are subject to change by the manufacturer without notice.
SECTION B-B
SECTION B-B
SECTION A-A
