paratech 22-796RG1, Инструкция по эксплуатации, техническому обслуживанию и запасным частям

Страница: 8 / 29

7
RESCUE GUARDIAN – Switch Functionality
Activity Push button 1 (SELECT) Black Push button 2 (ARM / DISARM) Red
Press Momentarily
Button 1 and Button 2 Power ON
Press and Hold 5 seconds
(Button 1 and Button 2
Simultaneous) Power OFF
Press and Hold 5 seconds Turn on/off Display Front Light Load Alarm
SET & RESET*
Press Once Momentarily When display ON: Toggle Between
Load Units and Incline
When Display OFF: Wake up Display No Functionality
Self-Calibration on Start up
Install charged batteries and secure the battery compartment lid of the Rescue Guardian. Place
the Rescue Guardian on a Flat surface and depress both Pushbuttons quickly and simultaneously.
The Rescue Guardian will enter a
“self - calibration” mode so it is imperative to NOT to move the
unit for approximately 10 seconds as it powers up.
Threshold Settings
Definition - The point at which a sensor reading exceeds the minimum or maximum parameters
entered by the user triggering the Alarm Condition.
Load
(Selectable Units)
Incline Angle
(Degrees)
Vibration
(Hertz)
Pounds Min 100 - Max 2300 Min 0.1 – Max 15 1hz – 100hz
Kilograms Min 45 - Max 1043
Newtons Min 444 - Max 10230
*Default ALARM Thresholds - 500lbs Load , 1.5 degrees Incline, 100Hz Vibration – these default
threshold settings are NOT user changeable.
DISPLAY
The Rescue Guardian utilizes a state-of-the-art 2.7 inch front lit display developed to be
readable in any lighting condition. Ultra-Low power consumption and high resolution coupled
a wide/symmetrical viewing angle ensure that all critical information is displayed legibly to the
user.