Paratec Next, Руководство пользователя

Страница: 4 / 49

Paratec GmbH
Next H / C
Issue II
04-2005
Owner‘s Manual
4
About this Manual
This manual cannot substitute for the knowledge and training you get in a
proper riggers course. The scope of this manual is also not to enable you to
pack this reserve container without any basic skills.
It is the responsibility of every trained and licensed rigger to as-
semble, inspect and pack to the manufacturers instructions, recom-
mendations and to his best knowledge and ability before he seals
and signs any packjob.
It is also in the responsibility of every user, to stay within the limitations set
by the manufacturer regarding maintenance cycles, wing loadings and pack
opening speeds, to not endanger himself nor his fellow skydiver friends !!
This manual is a source of compact information, both for the owner and the
rigger.
Read Before Assembling
Inspect the entire parachute system, reserve, harness/container, main
parachute and all other components, before you begin to assemble, pack or
use this parachute system.
Your NEXT should be assembled by a properly certified Rigger (or equivalent
rated person in your country).
Before assembling, be sure that the parachutes are compatible with this rig.
To check for compatability, refer to the chart on page 48 in this manual.
Should the pack volume of your parachute not fall under the figures in this
chart, then contact us immediately for further assistance.
Assemble this harness / container also in accordance with the reserve
parachute manufacturer‘s manual and the AADs manufacuters manual.