Parasound JC 3 Jr., Руководство пользователя

Страница: 7 / 16

7
AC Voltage Selection
115 V / 230 V AC Voltage Selector Switch
This switch is found on the underside of the chassis. Make sure the 115 V/230 V switch is set for
the correct AC line (mains) voltage before you plug in the JC 3 Jr.’s AC power cord.
Note: The JC 3 Jr. could be seriously damaged if the AC Voltage Selector switch is in the
wrong position for your voltage!
Prior to plugging your JC 3 Jr. into an AC power source, check the position of the
115v/230v switch on the JC 3 Jr.’s chassis bottom and do not depend on the 115
V or 230 V
markings on the carton .
The 115 V setting is correct for North America where the JC 3 Jr. can operate safely with AC line
voltages between 110 V-120 V. Most other countries will require the switch to be set to 230 V. With
the 230 V setting the JC 3 Jr. can operate safely with AC line voltages between 220 V-240 V.
Always turn off your JC 3 Jr. and disconnect its AC cord before making or changing the input,
audio output or trigger wire connections. Inserting or removing an input or output cable while the
JC 3 Jr. and your line stage preamp and power amplifier are turned on can result in a blast of
sound that can damage your loudspeakers. Make sure there is no strain or tension on any cables
that could cause them to pull loose.