8
Analog Audio Input Connections (Continued)…
RCA Line Level Input Jacks (Inputs 1-5)
Source inputs 1–5 all have the same input sensitivity and input impedance and are compatible
with any typical analog line level source.
Note:
Input 5 is shared with the XLR balanced input connectors, therefore the
RCA and XLR jacks for input 5 cannot be connected at the same time.
XLR Balanced Input (Input 5)
Input 5 also uses balanced XLR type jacks. Use this input to connect an analog source which
has balanced XLR outputs. A balanced line provides superior hum and noise cancellation,
especially for long cable runs.
Note:
Input 5 is shared with the XLR balanced input, therefore the RCA and
XLR jacks for Input 5 cannot be connected at the same time.
Front Panel Aux Input
For your convenience there is an input jack on the front panel for a portable MP3 player,
tablet, or mobile phone. Connect a cable with 3.5
mm stereo mini plugs between your portable
player, tablet or phone’s headphone jack and the HINT 6’s Aux input jack. The Aux input has
an additional gain stage that boosts the input signal by 12
dB so that the volume level is
comparable with your other audio sources. For the best result set your portable player or
phone’s volume to at least 75% of its maximum level.
Note:
If you connect a component other than a portable MP3 player or phone to the Aux
Input jack, the volume level will probably be too high and likely distorted.
