background image

 

4

INTRODUCTION 

 
 

Thank You for Choosing Parasound 
 

Your new Parasound Halo JC 1+ power amplifier has been designed with the most advanced, proven class 
A/AB amplifier technology. The JC 1+ is built to extremely strict quality and performance standards for which 
Parasound is renowned. We’re proud to offer you this exceptional audio component that will bring you many 
years of enjoyment and dependability. We designed your new Halo JC 1+ Amplifier to perform at a higher 
level of sonic performance than you might have expected and we encourage you to read this entire manual to 
maximize your enjoyment. We wish you many years of listening enjoyment. 
 
 

-The Parasound Staff 
 
 
 
Keeping Records for Future Reference 

Record the serial number located on the back panel or bottom of your JC 1+ in the space below. Also note 
your Parasound dealer’s name and telephone number. Your purchase receipt/bill of sale is required to 
determine if your JC 1+ is eligible for Parasound warranty service. We recommend that you make an extra 
copy of your original purchase receipt/bill of sale and store it inside the JC 1+’s carton.  
 
 
 
Parasound JC 1+ Amplifier Serial #:  ______________ (5 digit number below the bar code)  

 

Parasound Dealer: _________________________________________ 

 

Parasound Dealer Phone Number: _____________________________ 

 

Date of Purchase: __________________________________________ 
 

 
 
 
Important Warranty information 

There is no Parasound warranty for this unit if it was not purchased from an Authorized 
Parasound Dealer.

 A list of Authorized Parasound Dealers and detailed warranty information is available at 

www.parasound.com 

or you can call 

415-397-7100 

between 8:30 am and 4 pm Pacific time. A missing or 

altered serial number could indicate that this unit was re-sold by an unauthorized dealer or is stolen 
merchandise. If this unit is missing its serial number or the serial number has been altered, you should return 
it to your dealer immediately for a full refund. 
 
Investigate any claims made by a dealer who is not listed on our web site very carefully. Statements an 
unauthorized dealer makes regarding their own coverage or third party warranty coverage are undependable 
and misleading because unauthorized dealers and warranty companies lack the capability to make repairs or 
arrange for repairs of Parasound equipment.  
Unauthorized dealers lack the capability to make repairs or arrange for repairs of Parasound equipment.   

Содержание HALO JC 1+

























Отзывы: