background image

1

THANK YOU!

Congratulations and Thank You for Choosing Parasound

Your  new  Parasound  Halo  Series  JC  1  mono  block  power  amplifier  represents  the  latest 

advancements in amplifier technology. The JC 1 was designed by CTC builders and it uses higher 

quality parts and achieves higher performance than any amplifier we’ve made since Parasound 

was founded in 1981. We’re proud to offer you this exceptional audio component, knowing that it 

will bring you many years of enjoyment and dependability.

Here at Parasound, we design our products to perform at a higher level of flexibility and sonic 

performance than you may have expected. We encourage you to read this entire manual to learn 

all the features and capabilities of your new JC 1 Amplifier.

If you’re eager to get up and running right away, simply follow the basic step-by-step instructions 

to connect and operate the JC 1. If you want to learn more about the technical and design aspects 

of your JC 1, refer to the Technically Speaking and Design Overview sections in the back of the 

manual. If you run into difficulties, the Troubleshooting Chart should help you quickly remedy the 

problem.

We  appreciate  you  taking  the  time  to  read  these  instructions  and  thank  you  for  selecting 

Parasound for your listening pleasure.

The Parasound Staff

Unpacking Your JC 1

Unpack  your  JC  1  from  the  shipping  carton,  remove  the  enclosed AC  power  cord,  the  small 

“L” shaped metal rack mounts, and the gray control wire with a sub-mini 2.5 mm plug on each 

end. (This is the trigger connection wire). While you are unpacking your new amplifier, inspect 

it thoroughly for possible shipping damage. If you see any, contact your Parasound dealer right 

away. Be sure to save and store both the inner and outer cartons and the packing inserts for 

possible future transport. To save
room for storage, you can cut the seams on the bottom of the cartons and flatten them.

Keeping Records for Future Reference

Record  the  serial  number  located  on  the  bottom  of  your  JC  1  in  the  space  below. Also  note 

your Parasound Dealer’s name and phone number. We recommend that you keep your purchase 

receipt  with  this  manual  and  store  them  both  in  a  safe  place. You  may  need  to  refer  to  this 

information sometime in the future.

Parasound JC 1 Amplifier Serial #: ____________________________________

Parasound Dealer: ___________________________________________________

Phone Number______________________________________________________

Date of Purchase: ___________________________________________________

YOU SHOULD KNOW 

There is no Parasound warranty for this unit if it was not purchased from an Authorized Parasound 

Dealer. Investigate any claims of warranty coverage made by unauthorized dealers very carefully 

as you will need to depend entirely upon the dealer, and NOT upon Parasound. Unauthorized 

dealers may lack the capability to arrange repairs of Parasound equipment. Authorized Parasound 

Dealers are listed at www.parasound.com or you can call 415-397-7100 between 8:30 am and 4:30 

pm Pacific time. 

A  missing  or  tampered  serial  number  could  indicate  that  this  unit  was  stolen  or  sold  by  an 

unauthorized dealer. You should return it to your dealer immediately for replacement or a full refund.

Содержание HALO JC 1























Отзывы: