background image

2

Important Safety Instructions

The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of
“dangerous voltage” inside the product that may constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance instructions in the literature accompanying the product.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

1.

Read Instructions

— Read all the safety and operating instructions before operating this product.

2.

Retain Instructions

— Retain safety and operating instructions for future reference.

3.

Heed Warnings

— Adhere to all warnings on the product and in the operating instructions.

4.

Follow Instructions

— Follow all operating and use instructions.

5.

Cleaning

— Unplug this product from the wall outlet before cleaning. Use a damp cloth for cleaning. Clean the

outside of the product only.

6.

Attachments

— Do not use attachments that are not recommended by the product manufacturer; they may be

hazardous.

7.

Water and Moisture

— Do not use this product near water.

8.

Accessories

— Do not place this product on an unstable cart or stand. The product may fall, causing bodily injury

and damage to the product. A product and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product and cart to overturn.

9.

Ventilation

— Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the

product and to protect it from overheating. These openings must not be blocked or covered. This product should not be
placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.

10.

Power Sources

— Operate this product only from the type of power source indicated on the label. If you are not

sure of the type of power supply to your home, consult your dealer or local power company. This product is equipped with
a three-prong grounding plug. This plug will only fit into a grounding power outlet. If you are unable to insert the plug into
the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding plug.

11.

Power Cord Protection

— Power supply cords should be routed so that they are not likely to be walked on or

pinched by items placed upon or against them.

12.

Lightning

— Unplug the unit from the wall outlet for added protection during a lightning storm and when it is left

unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power line
surges.

13.

Overloading

— Do not overload wall outlets or extension cords. This can result in a fire or electric shock.

14.

Inserting Objects into Unit

— Never push objects of any kind into this product through any openings; they may

touch dangerous voltage points or short out parts that could result in fire or electric shock.

15.

Servicing

— Do not attempt to repair or service this product yourself. Opening or removing covers may expose you to

dangerous voltage and other hazards. Refer all servicing to qualified service personnel.

16.

Damage Requiring Service

— Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a)

If the power-supply cord or plug is damaged.

b)

If liquid has been spilled into the product.

c)

If the product has been exposed to rain or water.

d)

If the product does not

operate normally by following the operating instructions.

e)

If the product has been dropped or damaged in any way.

f)

If

the product exhibits a distinct change in performance.

17.

Replacement Parts

— When replacement parts are required, be sure the service technician has used replacement

parts specified by the manufacturer. Unauthorized substitutions may result in fire, electric shock, and other hazards.

18.

Safety Check

— Upon completion of any service or repairs to this product, ask the service technician to perform

safety checks to determine that the product is in proper operating condition.

19.

Wall or Ceiling Mounting

— Mount the product to a wall or ceiling only as recommended.

20.

Heat

— The product should be situated away from heat sources such as radiators, heat registers, stoves, and other

products (including amplifiers) that produce heat.

Содержание Halo Integrated



























Отзывы: