New Tone Controls and Lipsync
These features offer you new options and they
include new menu settings. The settings are found
in the
Audio setup
menu.
To make settings in the
Audio setup
menu, you
first press the
Menu button
on the front panel, or
the
MENU button
on the remote handset.
Press the
v down cursor button
or press the front
panel
Menu button
until the menu’s
>
cursor lines
up with “
Audio setup
”. Press the center of the
thumbpad
on the remote or turn the front panel
knob just a little in either direction. Select “
Tone
controls
” and press the center of the
thumbpad
to enter the
Tone setup
menu.
Treble and Bass Tone Controls
Review: Treble and Bass
can be set in 1 dB steps for up to 12 dB of cut or boost. Bass and
Treble tone settings affect only the front left, center, and right channels.
After the menu setup is concluded, any Bass or Treble adjustments you make while you’re lis-
tening will temporarily add to, or subtract from, their settings on the
Audio setup
page.
For example, if you had set
Treble
to
+2dB
in the
Audio setup
menu, then the first time you
press the remote’s
+ TRE key
(on the C 1/C 2 page) it will increase to
+3dB
. Or the first time you
press the
TRE – key
on the remote it will reduce to
+1dB
.
NEW CONTROLS
8
MAIN MENU
SIZE SETUP
Main Menu
> Audio setup
Speaker setup
Source setup
Display setup
Trigger setup
THX Audio setup
Exit
AUDIO SETUP
TONE CONTROLS
Audio setup
Dolby/DTS setup
Preset setup
> Tone controls
LFE level
0dB
Reverb
Dry
Exit
TONE CONTROLS
TREBLE:
2DB
Tone controls
Bass
+
0dB
> Treble
+
|
2dB
Treble freq
6 kHz
Bass freq
80 Hz
Exit
