
•
Add a rear-channel subwoofer: try 50% B, 25% LS, and 25% RS. Then add low-pass filtering, if
needed, and a delay time for the sub’s distance from your seat. If you prefer to add subwoofers
on the sides of the room, try feeding the left sub 100% L + 60% C + 100% LS + 60% LFE, and
feed the right sub 100% R + 60% C +100% RS + 60% LFE.
•
Add time-delay for a tactile-transducer: try 100% LFE + 0% to 50% C, + 50-100% each of L, R,
LS, and RS.
•
Add a central overhead channel: Try 100% each of LS and RS, or (2) 30% C + 10% LS + 10% RS
+ 50% B. If you find yourself acutely aware of sound coming from this new speaker, adjust the
channel’s low-pass filter to roll off its highs above, say, 8kHz to blend it with the other speakers,
whose high frequencies are less noticeable because they’re further away.
•
Create a mono channel for an adjacent room, try 100% C + 50% L + 50% R + 25% LS and RS,
and adjust the LFE percentage or high pass filter so as not to overload the speaker with bass it
can’t handle.
•
Add more front speakers: for an extra-wide room, place inboard of the L and R speakers. Feed
the left one 50-75% L + 50-75% C; feed 50-75% R + 50-75% C to the speaker on the other
side. If you prefer outboard speakers, feed the far left speaker 60% L – (not +) 40% R (which
injects right-channel signal with its polarity inverted), and 60% R, – 40% L to the far left one.
•
Add more front speakers: if your two front speakers are closer to each other than their distance
to your seat, you can synthesize greater channel separation by feeding them from the Aux
rather than the L and R outputs, with, say, 100% L - 30% R to the left speaker and 100% R -
30% L to the right speaker.
Input/Output Summary
The table below summarizes the available connections:
Note:
Programmable Outputs can access the same sources as the Main Outputs.
1
= Available at the composite video “OSD” output jack; not available at the “No-OSD” output jack
CONNECTING THE AUDIO AND VIDEO OUTPUTS continued
51
Unbalanced Analog In
Yes
Yes
Yes
Yes
No
Yes
Balanced In – Normal
Yes
Yes
Yes
Yes
No
Yes
Balanced In – Bypass
No
Yes
No
No
No
No
Tape Monitor Play/In
Yes
Yes
No
No
No
No
Digital Inputs
Yes
Yes
No
No
Yes
No
7.1-Channel
Analog Inputs
Yes
Yes
Yes
Yes
No
No
AUDIO
MAIN
BALANCED RECORD 1 &
TAPE
DIGITAL
ZONE
OUTPUTS
OUTPUTS
OUTPUTS
RECORD 2
MONITOR
OUTPUTS
OUTPUT
OUTPUTS
REC/OUT
Available From
Composite Video In
Yes
No
No
Yes
No
Yes
S-video In
Yes
1
Yes
No
No
Yes
No
Component Video In
No
No
Yes
No
No
No
VIDEO
COMPOSITE
S-VIDEO
COMPONENT COMPOSITE
S-VIDEO
ZONE
OUTPUTS
VIDEO
OUTPUTS
VIDEO
VIDEO
REC/OUT
OUTPUT
OUTPUTS
OUTPUT
REC/OUT
Available From
Содержание HALO C-2
Страница 1: ...C 2 Controller Owner s Guide...
Страница 67: ...67 CONNECTION AND SETUP NOTES Notes...