PARASIT STUDIO Xor'cist, Быстрый старт

Страница: 4 / 7

The XOR'CIST Bill Of Materials (BOM)
•
* These are current limiting resistors for the rate indicator
LED's and the modulation indicator LED. Use the appropriate
value for your LED type. I use 15K resistors in my fully
assembled builds (with superbright LED's).
•
The gate trimpot sets the decay of the ringmodulation carrier
frequency gate. Set the blend fully clockwise and adjust the
trimmer to match the sustain of short notes.
•
The sens trimpot sets the input string sensitivity and a balance
between gate and sustain.
•
The DIP switch has two functions. It can toggle on/off the LFO
gate and set the momentary switch action as either latching or
momentary.
•
Not included in the BOM:
◦
1x bypass LED
◦
1x CLR (current limiting resistor) for the bypass LED
◦
Also not included in the BOM but also good to have:
enclosure, input and output jacks, LED bezels, DC jack,
3PDT bypass switch, knobs.
Resistors R19 15K* IC's
R1 1M R20 15K* U1 CD4069UBE
R2 1M Capacitors U2 CD40106BE
R3 1M C1 100nF U3 CD4070BE
R4 1M C2 2.2nF Potentiometers
R5 15K C3 4.7nF VOLUME A100K
R6 10K C4 100nF BLEND B50K
R7 100K C5 2.2uF FREQUENCY B50K
R8 100K C6 1uF RATE C50K
R9 100K C7 100nF Gate trim trimpot 100K
R10 100K C8 100nF Sensivitity trimpot 200K
R11 1M C9 100nF Switches
R12 1M C10 100uF Momentary SPST footswitch
R13 47K C11 100nF DIP-switch: 2 positions
R14 47K C12 33uF (2 switches, 4 pins)
R15 100K Diodes
R16 1M D1-D8 1N4148
R17 3.9K D9 1N4001
R18 15K* 3x LED's