Changelog version 2.0
•
Trimmed down and optimized circuit - all switches, except the
momentary one, has been removed. Most functions remains,
except the 3-way tone selector.
•
Input stage redesigned to prevent oscillation issues that some
people was having.
•
Input trimmer added to set the string sensitivity / balance
between gate and sustain.
•
Rate LED's are now board-mounted – no need for a special
3PDT daughterboard.
•
Dip-switch added to toggle between latching or momentary
switch action and gated or free running LFO.
•
Redesigned PCB for a easier straight forward build.
Controls
Potentiometers
VOLUME – Controls the overall output volume
BLEND – Blends between straight fuzz and ringmodulation
The blend pot goes from stutter fuzz (CCW) to alternating between
fuzz and ringmod, to stuttering ringmod (CW) when the modulation
is active
FREQUENCY – Sets the carrier frequency of the ringmodulation
RATE – Controls the speed of the squarewave modulation
Switches
FOOTSWITCH – This is a momentary footswitch that toggles the
stutter on or off.
The footswitch action can be either momentary or latching,
depending on the board-mounted dip-switch
Содержание Xor'cist
Страница 6: ...Schematic...
