Paramount Fitness Paraskim V, Руководство пользователя и инструкция по установке

Страница: 8 / 20

8
PARASKIM NON-VENTURI STYLE PLUMBING
PLUMBING: NON-Venturi – Direct Suction
Connections
1. Set the skimmer level as you would install a
conventional skimmer. The skimmer face must be set a
minimum 2" back from the interior of the concrete shell.
2. SUCTION LINE – Fig. 5. Plumb the rear bottom
suction port with 2" Schedule 40 PVC from the
skimmer to the pump inlet. Plug the unused 2nd
bottom 2" suction line or see optional uses in step
4 or 5.
3. RETURN VENTURI LINE – Plug this 2" line in the
external 2" port. This port is only used as a venturi
return line.
WARNING
Do not use this port for any other connection.
4. Optional SKIMMER EQUALIZER LINE - Fig. 6.
If a equalizer line is required plumb the front bottom
2" port with an 18" length of 2" Schedule 40 PVC
and cap the end to prevent gunite from entering.
An optional float valve assembly will be
needed for this option. Float valve purchased
separately. Install an equalizer fitting that
conforms to ANSI/APSP-16.
5. Optional MAIN DRAIN LINE – Fig. 7. (Do not use
this option if the pool has an in-floor cleaning
system.) If a floor “Main Drain" is plumbed to the
skimmer plumb the front bottom 2" port to a
minimum of two floor “main drains" sized with an
appropriate flow rating to match the maximum
possible system flow based on a proper hydraulic
calculation.
NOTICE
An optional float valve assembly will be needed
for this option. Float valve purchased separately.
Pentair #08650-0017
PLUG
PLUG
PUMP SUCTION
OPTIONAL
EQUALIZER LINE
GUNITE
2" MIN.
Fig. 6
Optional equalizer line
PUMP SUCTION
PLUG
GUNITE
OPTIONAL
MAIN DRAIN
LINE
PLUG
2" MIN.
Fig. 7
Optional main drain line
PUMP SUCTION
PLUG
OPTIONAL SUCTION
GUNITE
PLUG
2" MIN.
Fig. 5
Optional second suction