ASSEMBLY INSTRUCTIONS
7. Connect hose and regulator to cylinder.
The propane gas and cylinder are sold separately.
Use a standard 20 Ib. propane cylinder only.
Use this heater only with a propane vapor withdrawal
supply system. See chapter 5 of the standard for
storage and handling of liquefied petroleum gas,
ANSI/NF PA58.
Your local library or fire department
should ha
ook.
ve this b
Storage o
f an appli
ance indoors is permissible only if
the cylin
connected and removed fr
the
der is dis
om
appliance
. A cylinder
must be stored outdoo
rs in a
well
-v
ent
ilated are
a out of the reach of childre
n. A
discon
nected cylin
der must have dust caps tightly
installed
and must
not be stored in a build
ing,
garage or
any other enclosed area. The maximum inlet gas supply
pressu
re: 250 psi,
The minimum inlet gas supply
pressu
re: 5 psi.
The minim
um hou
rly of 10000 Btu
is
the require d input
rating fo
r a heate
r for automat
ic
operation
at
ratings less
than full
input rati
ng.
The pr
essure reg
ulator and hose assembly supplied
with the appliance must be used.
The insta
llation m
ust conform with local codes,
or in
the
absenc
e of local c
odes,with national fuel g
as
c
ode,
ANSI
Z
223.1/N FPA45 ,
natural ga s and prop ane
Installat
ion Cod e ,
CSA B149.1, or propane storage and
handling
code, B14
9.2.
7
Standard 20 lb. tank
Us e the L P G C over-T t o c over the L P G t ank p rior to p lac ing t he L P G t ank u nder t he
as s embled f ire
pit
J
11
