4.
Connect green ground wire to the time clock ground bar
(Fig. 6A)
. The
Clear O3
®
unit is set to 240VAC to be connected to the load side
(Fig.
6B)
of the filtration pump time clock. The ballast may be switched to
120VAC if needed
(Fig. 7)
. See wiring diagram
(Fig. 4)
. (Go to page
21-23 for complete instructions on changing the ballast setting)
MAKING ELECTRICAL CONNECTIONS (CONT.)
8
For technical assistance call 1.800.621.5886 or contact your regional representative
Fig. 5A
Fig. 5B
Fig. 6B
Fig. 6A
Fig. 7
Ground Lug
