Paramount Fitness BM10, Руководство по установке и эксплуатации

Страница: 6 / 17

4
Unpacking
Immediately after unpacking the mixer, check it for possible shipping damage. If this machine is
found to be damaged after unpacking, save the packaging material and contact the carrier within
one day of delivery.
Location
Place the mixer in its operating location - this should be a sturdy level surface. There should be
adequate space around the mixer for the user to operate the control and install and remove bowls.
Holes are provided in the base to permanently secure the mixer, although this not necessary in
normal installations.
Floor models must be leveled front-back and side-to-side by sliding shims under the legs as
required.
Electrical Connection
The supply cord on this machine is provided with a three-pin 13A fused and earthed plug. It is
imperative that the outlet to which this plug is connected be properly earthed (grounded).
Prior to installation, test the electrical service to assure it agrees with the specifications on the
machine data plate located on the back side of the pedestal.
Permissible voltage fluctuation is ± 10% of nominal voltage.
Components having adjustments protected (e.g. paint sealed) by the manufacturer, are
only allowed to be adjusted by an authorised service agent.
Rotation
To start the motor, push the 'ON' button. The speed selector handle must be at one of the
numbers indicating a speed, not an intermediate rating.
Before installing the mixer, check that the available electrical supply match that
of the mixer as stated on the mixer’s rating plate.
Installation