background image

 

OPERATION 

 

<Attach the name holder> 

 

Pay attention to the following points to attach the name 
holder so that suction power is not weakened. 

• The suction cup is placed on a flat surface of the 

plastic basket.

 

• Wipe off stains from the surface of the suction cup and 

the surface of the plastic basket and press the suction 
cup so it attaches. 

 

 

 Attach the name holder in a location that is 

not within reach of the infant. 

 If the suction cup comes off and the name 

holder has fallen, put it back on the plastic 
basket again. 

 
 

WARNING 

 When operating the inclination lever or Hi-low lever, use one hand to grab 

and support the basket holder grip to prevent a sudden change in the cart 
angle and height. A sudden change in the cart angle or height could impact 
the infant, causing injury. (Height adjustment is only available with the 
KB-116EG.) 

 When lines or cables are used, be careful when adjusting the angle or 

height. Lines or cables could come off, causing injury to the infant. (Height 
adjustment is only available with the KB-116EG.) 

 

 

<Angle adjustment method> 

 

By pulling the inclination lever located at the head end 
of the cart, the cart angle raises automatically. Use one 
hand to grasp the basket holder grip to support it, then 
pull up the inclination lever to adjust the angle*

1

 to the 

desired angle. When you release the lever, the angle is 
fixed at that position. 

*

1

 To lower the cart inclination angle, grasp the basket 

holder grip to support it, then pull up the inclination 
lever and push downward. 

 

 

<Height adjustment method: KB-116EG 
only> 

 

Pulling up the Hi-low lever allows you to change the cart 
height. Use one hand to grasp the basket holder grip to 
support it and then pull up the Hi-low lever to adjust the 
cart height *

2

 to the desired height. When you release 

the Hi-low lever, the angle is fixed at that position. 

*

2

  To lower the cart height, grasp the basket holder 

grip to support it, then pull up the Hi-low lever and 
push downward. 

 
 

 

Basket holder grip 

Hand-rest cover 

Hi-low lever 
(One at left and right, 
each) 

Basket holder grip 

Inclination lever 

N

o

te

Plastic basket 

Sucker 

Name holder 

Содержание 12B1X10020000102

















Отзывы: