OPERATION MANUAL V1.0
PAGE 5
Sync Channel from Receiver
Ú
Transmitter
Channel Synchronising of the Receiver and Transmitter
STEP 1:
Press the SYNC button of the receiver.
STEP 2:
The receiver’s LCD will display
IRDA DATA SEND
to
denote synchronising signal being sent.
STEP 3:
The channel/frequency of the transmitter will
change. Synchronisation is complete when the LCD displays
PLL CHANNEL COPIED BY IRDA
.
STEP 4:
Please try again if LCD displays
IRDA SEND FAIL
..
Sync Channel from Transmitter
Ú
Receiver
STEP 1:
Press the synchronising button of the
transmitter.
STEP 2:
The transmitter’s LED will glow to denote
transmitting the frequency to the receiver and
synchronising the channels.
STEP 3:
The channel/frequency of the receiver will
change and then the synchronisation is complete.
If it doesn’t work check that you have the IR sensor panels aligned, that they are facing each other, devices are within
30cm of each other, and try again.
Align infrared areas of the receiver and transmitter within 10~30cm.
CH:001
VOL:15
CH:010
VOL:15
PLL CHANNEL
COPIED BY IRDA
CH:001 650.000M
IRDA DATA SEND
Volume Adjusting
1.
The setting can be made right on the homepage.
2.
Press
p
(UP) or
q
(DOWN) button to choose volume level. 5 seconds after selecting a channel, it will be
automatically saved.
CH:001
VOL:15
CH:001
VOL:10
Содержание Stage-100 Series
Страница 1: ......
