● 1 - GoPro Hero 3 or 3+ Camera
● 10” - U-Channel Aluminum Extrusion, appx 0.65” wide by 0.5” tall (sold in some
hardware stores as "plywood edge trim")
● 2 - 3.5mm Bullet Connector, Male
● 2 - 3/16” Heat-Shrink Tubing, ½” (1 cm) long
● 6 - Machine Screw, #4-40 x ⅜”, Pan Head
● 2 - Internal Lock Washer, #4 OR Locktite Threadlocker
● 1 - Locknut, #4
● 2 - Standoff, #4-40 x ⅞”
● 1 - Servo Extension (3-wire) Cable, Male to Female, 4 to 8” (optional)
Tools
● PC running Windows 7 with Internet Access
● Pencil or Metal Scribe
● Measuring Tape or Calipers
● Hacksaw
● Metal File
● Power Drill
● #30 or 4/32” Drill Bit
● Vice or Clamps
● #1 Philips Head Screwdriver
● Soldering Iron (We recommend the Parallax Basic Soldering Kit, #700-10011)
● Rosin-Core Solder (Also in the Parallax Basic Soldering Kit)
● Work-Holding Vise (Also in the Parallax Basic Soldering Kit)
● Metal or Wood Block with 5/32” (4 mm) hole (optional)
● Heat Gun, Hair Dryer, or Soldering Iron
● 1/4” Wrench or Adjustable Wrench
● Flat-Nose Pliers
Copyright © Parallax Inc.
Add a Gimbal Mount to Your ELEV-8 V2
07/30/2018 Page 3 of 8
