Wireless Programming Quick-Start Guide
Items required
●
Propeller 2 board with the 2x6 P56–P63 header showing the RES logo
●
Parallax WX ESP8266 WiFi Module - SIP, #32420s
●
Suitable power supply for your Propeller 2 board
●
Computer with wireless network adapter
●
Propeller 2 programming software that generates binary files, such as the Propeller Tool 2.3
●
Latest P2 firmware and example binary, downloaded from the 64007 product page at
. The file “LED57.binary” will blink an LED connected to P2 I/O pin P57.
Connecting the Hardware
First, connect the Parallax WX ESP8266 WiFi Module - SIP (#32420s) to
the P2 WX Adapter (#64007) as shown. The WX Adapter has a white
silkscreen marking beside the WiFi module socket which indicates the
orientation of the metal can when the WiFi module is inserted.
Then, plug the adapter into the 2x6 header marked RES on your P2
development board. The header must also connect to P2 I/O pins
P56–P63, power, and ground as shown below.
Copyright © Parallax Inc.
P2 WX Adapter Add-on Board (#64007)
v1.0 11/12/2020 Page 2 of 7
