Paragon CLASSIC POP 14, Руководство пользователя

Страница: 4 / 16

4
ELECTRICAL REQUIREMENTS
The Paragon Classic Pop 14 requires a properly-grounded 120 volt supply with a 15 amp circuit. The
Paragon Classic Pop 16 oz Popper requires a properly grounded 120 volt supply with a 30 amp circuit. The
14 oz popper has a current draw of 15 amps. The 16 oz popper has a current draw of 24 amps. (Export
voltage is 230VAC.)
We recommend your Paragon Popcorn Machine be plugged directly into a dedicated outlet. Extension
cords may create a safety hazard and reduce its performance.
Be sure outlet accepts three (3) prong grounded plug. DO NOT use a three (3) prong to two (2) prong
adapter.
CONTROLS AND FUNCTIONS
POWER:.......................................................
Turns on the Presentation Lamp, lighting the area for
better food display.
WARMER: ...................................................
Powers the Built-in Warming Deck to continue heating
popcorn after kettle cooking.
STIRRER: ...................................................
Activates the motor which evenly distributes kernels
with oil, seasoning, and heat to create the best product
possible.
KETTLE: .....................................................
Begins heating the kettle featuring patented heater
arrangement, which optimizes popping process.
WAIT/READY INDICATORS: .....................
Light during popping to indicate when it’s ready to add
popcorn ingredients.
UNPACKING
Paragon carefully inspects each product during assembly and after completion to adhere to strict quality
guidelines, and packs it securely to ensure safe delivery to each of our customers. Be sure to carefully
remove all packing material and adhesive before any operation. Please examine your product to guarantee
all equipment has arrived, complete and in good condition.
If you believe that any damage may have occurred during shipment or parts may be missing, please
contact Paragon immediately for replacement.
4
ELECTRICAL REQUIREMENTS
The Paragon Classic Pop 14 requires a properly-grounded 120 volt supply with a 15 amp circuit. The
Paragon Classic Pop 16 oz Popper requires a properly grounded 120 volt supply with a 30 amp circuit. The
14 oz popper has a current draw of 15 amps. The 16 oz popper has a current draw of 24 amps. (Export
voltage is 230VAC.)
We recommend your Paragon Popcorn Machine be plugged directly into a dedicated outlet. Extension
cords may create a safety hazard and reduce its performance.
Be sure outlet accepts three (3) prong grounded plug. DO NOT use a three (3) prong to two (2) prong
adapter.
CONTROLS AND FUNCTIONS
POWER:.......................................................
Turns on the Presentation Lamp, lighting the area for
better food display.
WARMER: ...................................................
Powers the Built-in Warming Deck to continue heating
popcorn after kettle cooking.
STIRRER: ...................................................
Activates the motor which evenly distributes kernels
with oil, seasoning, and heat to create the best product
possible.
KETTLE: .....................................................
Begins heating the kettle featuring patented heater
arrangement, which optimizes popping process.
WAIT/READY INDICATORS: .....................
Light during popping to indicate when it’s ready to add
popcorn ingredients.
UNPACKING
Paragon carefully inspects each product during assembly and after completion to adhere to strict quality
guidelines, and packs it securely to ensure safe delivery to each of our customers. Be sure to carefully
remove all packing material and adhesive before any operation. Please examine your product to guarantee
all equipment has arrived, complete and in good condition.
If you believe that any damage may have occurred during shipment or parts may be missing, please
contact Paragon immediately for replacement.
The Paragon Classic Pop 14 requires a properly-grounded 120 volt supply with a 15 amp circuit. The Paragon Classic
Pop 16 oz & 20 oz Poppers require a properly grounded 120 volt supply with a 30 amp circuit. The 14 oz popper has a
current draw of 15 amps. The 16 oz & 20 oz poppers have a current draw of 24 amps. (Export voltage is 230VAC.)
We recommend your Paragon Popcorn Machine be plugged directly into a dedicated outlet. Extension cords may create a
safety hazard and reduce its performance.
Be sure outlet accepts three (3) prong grounded plug. DO NOT use a three (3) prong to two (2) prong adapter.
7
INSTALLATION INSTRUCTIONS
For applications which must comply to sanitation requirements under NSF NO.4 STANDARD.
Under the NSF No. 4 Standard, the models Classic Pop-14 and Classic Pop-16 are defined as other than
portable when used on counter or table tops. This machine must either be mounted on legs to provide a
minimum of four inches of unobstructed space underneath, or must be sealed to the counter or table top.
Option 1: MOUNTING ON LEGS
Order GMI Part No. 16042 (Optional Legs kit). Follow the instructions for installation as
included in the kit.
Option 2: SEALING TO THE COUNTER
1. Remove the cleanout tray and drawer.
2. Remove the terminal box covers.
3. Lay the machine on it front side (doors on top) on a protective pad.
4. Use a ¼” drill to remove the rivet heads and pull off the feet.
5. Set the machine upright and position where it is intended to be used.
6. Apply a bead of NSF accepted RTV sealant along the bottom edges of the machine.
7. Re-assemble the terminal box covers and replace the cleanout tray and drawer.
7
INSTALLATION INSTRUCTIONS
For applications which must comply to sanitation requirements under NSF NO.4 STANDARD.
Under the NSF No. 4 Standard, the models Classic Pop-14 and Classic Pop-16 are defined as other than
portable when used on counter or table tops. This machine must either be mounted on legs to provide a
minimum of four inches of unobstructed space underneath, or must be sealed to the counter or table top.
Option 1: MOUNTING ON LEGS
Order GMI Part No. 16042 (Optional Legs kit). Follow the instructions for installation as
included in the kit.
Option 2: SEALING TO THE COUNTER
1. Remove the cleanout tray and drawer.
2. Remove the terminal box covers.
3. Lay the machine on it front side (doors on top) on a protective pad.
4. Use a ¼” drill to remove the rivet heads and pull off the feet.
5. Set the machine upright and position where it is intended to be used.
6. Apply a bead of NSF accepted RTV sealant along the bottom edges of the machine.
7. Re-assemble the terminal box covers and replace the cleanout tray and drawer.
Under the NSF No. 4 Standard, the models Classic Pop-14, Classic Pop-16 and Classic Pop-20 are defined as other than
portable when used on counter or table tops. This machine must either be mounted on legs to provide a minimum of four
inches of unobstructed space underneath, or must be sealed to the counter or table top.
4
ELECTRICAL REQUIREMENTS
The Paragon Classic Pop 14 requires a properly-grounded 120 volt supply with a 15 amp circuit. The
Paragon Classic Pop 16 oz Popper requires a properly grounded 120 volt supply with a 30 amp circuit. The
14 oz popper has a current draw of 15 amps. The 16 oz popper has a current draw of 24 amps. (Export
voltage is 230VAC.)
We recommend your Paragon Popcorn Machine be plugged directly into a dedicated outlet. Extension
cords may create a safety hazard and reduce its performance.
Be sure outlet accepts three (3) prong grounded plug. DO NOT use a three (3) prong to two (2) prong
adapter.
CONTROLS AND FUNCTIONS
POWER:.......................................................
Turns on the Presentation Lamp, lighting the area for
better food display.
WARMER: ...................................................
Powers the Built-in Warming Deck to continue heating
popcorn after kettle cooking.
STIRRER: ...................................................
Activates the motor which evenly distributes kernels
with oil, seasoning, and heat to create the best product
possible.
KETTLE: .....................................................
Begins heating the kettle featuring patented heater
arrangement, which optimizes popping process.
WAIT/READY INDICATORS: .....................
Light during popping to indicate when it’s ready to add
popcorn ingredients.
UNPACKING
Paragon carefully inspects each product during assembly and after completion to adhere to strict quality
guidelines, and packs it securely to ensure safe delivery to each of our customers. Be sure to carefully
remove all packing material and adhesive before any operation. Please examine your product to guarantee
all equipment has arrived, complete and in good condition.
If you believe that any damage may have occurred during shipment or parts may be missing, please
contact Paragon immediately for replacement.
4
ELECTRICAL REQUIREMENTS
The Paragon Classic Pop 14 requires a properly-grounded 120 volt supply with a 15 amp circuit. The
Paragon Classic Pop 16 oz Popper requires a properly grounded 120 volt supply with a 30 amp circuit. The
14 oz popper has a current draw of 15 amps. The 16 oz popper has a current draw of 24 amps. (Export
voltage is 230VAC.)
We recommend your Paragon Popcorn Machine be plugged directly into a dedicated outlet. Extension
cords may create a safety hazard and reduce its performance.
Be sure outlet accepts three (3) prong grounded plug. DO NOT use a three (3) prong to two (2) prong
adapter.
CONTROLS AND FUNCTIONS
POWER:.......................................................
Turns on the Presentation Lamp, lighting the area for
better food display.
WARMER: ...................................................
Powers the Built-in Warming Deck to continue heating
popcorn after kettle cooking.
STIRRER: ...................................................
Activates the motor which evenly distributes kernels
with oil, seasoning, and heat to create the best product
possible.
KETTLE: .....................................................
Begins heating the kettle featuring patented heater
arrangement, which optimizes popping process.
WAIT/READY INDICATORS: .....................
Light during popping to indicate when it’s ready to add
popcorn ingredients.
UNPACKING
Paragon carefully inspects each product during assembly and after completion to adhere to strict quality
guidelines, and packs it securely to ensure safe delivery to each of our customers. Be sure to carefully
remove all packing material and adhesive before any operation. Please examine your product to guarantee
all equipment has arrived, complete and in good condition.
If you believe that any damage may have occurred during shipment or parts may be missing, please
contact Paragon immediately for replacement.