Instruction manual radio controlled alarm clocks
1890 EN
Features
-
Time display in 12-/24-hour format
-
Daily alarm with alarm repeat function
-
Calendar: years 2000-2099
-
Weekday display in 7 languages: German (GER), English (ENG), Italian (ITA), French (FRE), Dutch (DUT), Spanish (SPA),
Danish (DAN)
-
Indoor temperature (°C/°F format to choose from)
-
LED backlight
-
Radio control function
-
Time zone selection: -12/+12 hours Difference
-
Power supply: 2x AAA batteries (not included)
Function keys
-
ALARM ON/OFF (On/Off)
-
TIME
-
WAVE
-
UP = upwards
-
DOWN = downwards
-
SNOOZE/LIGHT (snooze/light knob)
Instruction
Initial display: hour, minute, second, date (day and month), weekday, temperature
Commissioning
Open the battery compartment and insert two new alkaline batteries (type AAA). Radio reception will start immediately. After 5
to 7 minutes, the clock receives the signal and adjusts itself correctly. If the signal is too weak and the clock is unable to receive
correct time information, reception will be canceled. Another transmission attempt will then be initiated automatically every
two hours. If the clock still does not receive a sufficient signal, try to find a better location (near a window or turn the clock in 45
degree increments) and remove the batteries, wait one minute, and reinsert the batteries. Radio reception will resume.
Improvement of radio reception
Place the clock in a location where it will not be exposed to any electrical interference or shielding. Avoid placing the clock near
a television or computer. Reception is best at night, when many sources of interference are inactive.
Manual time setting
1.
Press and hold the TIME knob for 2 seconds to enter the time setting mode. The display blinks. 12HR/24 HR > Time
Zone (-12 to 12) > Hour > Minute > Year > Month > Day > Language > Exit.
2.
Press the "UP" or "DOWN" knob (press briefly or hold for 2 seconds to change the setting in 6 second increments) then
press the TIME knob to confirm the data.
3.
The entire setting mode will be exited automatically after 30 seconds without any adjustment.
12/24 Hour display
By briefly pressing the TIME knob, you can switch between 12 (AM/PM) and 24-hour displays.
Alarm Time Setting
1.
Press the "ALARM" knob to switch the alarm function on and off. When the alarm function is activated, the alarm
symbol is displayed on the LCD screen and flashes when the alarm is active.
2.
After 2 minutes, the alarm will automatically stop and resume the next day at the same time.
3.
Press the "ALARM" knob for 2 seconds to set the alarm time. Now you can use the "UP" or "DOWN" knob to set the
desired alarm time (hours - minutes - confirm/exit using the "ALARM" knob).
