5
Use
1
7
2
1.
Place the facial steamer onto a flat
stable surface.
2.
Open the plastic lid and remove the
water plug.
3.
Pour distilled water into the water cup
until it reaches the maximum water level
line.
IMPORTANT!
To prevent water
spouting do not overfill the water cup.
4.
Reinsert the water plug and close the
plastic lid.
5.
Insert the facial vaporizer plug into a
power source.
6.
Change the steam ON/OFF switch to the
ON
position. The switch will light up when
the facial vaporizer is powered, and the
Steam switch is in the ON position.
7.
Cover the client’s upper chest area with
towel or cloth to absorb excess moisture.
8.
Allow 10 minutes for steam to appear.
The steam should be a steady fine mist
before directing the steam towards the
client.
9.
Adjust the steam nozzle to the desired
direction, keeping a minimum distance of
12 inches from face.
10.
Position the steam arm in an upward
direction so the steam will travel up the
torso towards the face.
3
12”
6
9
Plastic Lid