Parts Breakdown
1. 45-00 UPRIGHT FRAME
2. 45-01 WHEEL BASE ASSEMBLY
(with fasteners)
3. 45-02 FLOOR PLATE(with fasteners)
4. 45-03 LEG PIPE
5. 45-04 SLIDE PIPE (with knob)
6. 45-05 SLIDE CLAMP (with fasteners)
7. 45-06 5” WHEEL (with fasteners)
8. 45-07 5” CASTER (with fasteners)
1
6
5
4
7
2
3
8
Attach the FLOOR PLATE to the
WHEEL BASE.
Fasten the wheeel base to the UP-
RIGHT FRAME using three 1/4” x 3/4”
bolts and 1/4” lock nuts. Finger tighten
only at this time.
Fasten the FLOOR PLATE to the
UPRIGHT FRAME using four 1/4” x 1/2”
bolts and 1/4” lock nuts. Inserting the
bolts will be easier if done in the order
shown. Tighten these bolts securely
using wrenches and do the same for
all other bolt assemblies that are still
only fi nger tightened.
1
st
2
nd
2
nd
Fasten the FLOOR PLATE to the
WHEEL BASE using two 1/4” x 3/4”
bolts and 1/4” lock nut. Inserting the
bolts will be easier if done in the order
shown. Finger tighten only at thie time.
1
st
2
nd
Attach the WHEEL BASE, aligning the
holes as shown.
Unpack box and check for assembly
components. (Yow will need two 7/16
wrenches)
1.UPRIGHT FRAME
2. WHEEL BASE
3. FLOOR PLATE
4. LEG PIPE
5. SLIDE PIPE with SLIDE CLAMP
ASSEMBLY
6. HARDWARE
(5) 1/4” x 1/2” (1 extra)
(6) 1/4” x 3/4” (1 extra)
(11) 1/4” locknut (2 extra)
4
5
3
2
1
6
Insert the SLIDE PIPE assembly into
the UPRIGHT FRAME with the KNOB
and CLAMP at the handle end of the
UPRIGHT FRAME.
Retract the LEG ASSEMBLY into the
UPRIGHT FRAME before proceeding to
the next step.
1
ST
2
ND
Begin by clipping
the LEG PIPE onto
the SLIDE PIPE in the
UPRIGHT FRAME assembly.
Clip the two pieces fully together and
slide the leg assembly fully into the
UPRIGHT FRAME.
3
RD
4
TH
5
TH
6
TH
7
TH
8
TH
9
TH
