3
9. Upon such termination, the Licensee shall refrain from any further use of the
Software and destroy the original and all copies of the Software in the possession of
Licensee together with all documentation and related materials.
10. This Agreement shall be governed by the laws of the State of Florida, without
regard to its provisions concerning conflicts of laws.
Package Contents
Unpack and Inspect the Equipment. The following components should be included:
1 SNE2020G
1 Power supply
If there is any visible damage, do not attempt to connect the device. Contact your sales
or service provider.
Connecting to Power
Plug the power supply into the Power Adapter port on the back of the SNE2020G and
connect it to your power source. Verify that the Power LED on the front of the
SNE2020G is illuminated.
Upon start up, the Ethernet link will remain disabled (as indicated by solid illumination of
the Ethernet Rx, Tx, and Lnk LEDs) until at least one of the two SHDSL connections has
been established.
1 2 3 4
Ethernet Connection
SDSL 2
Power Adapter
5V DC
SDSL 1
Configuration
SDSL 1
SDSL Connection
Power
SDSL Connection
SDSL 2
Collision
Rx
Tx
Lnk
Ethernet Connection
SDSL Network Extender 2000
SNE2020
04-17573
