A-6
Issue 3 April 1994
Table A-3. Modem — Telephone Line Connection (3 of 5)
Action
Symptom
CONNECTION PROBLEMS —
Dial Environments in Originate mode
Modem does
not go off-hook
and begin
dialing
Make sure the modem and PCMCIA socket are
configured for modem operation.
Make sure the telephone line connector is con-
nected to the modem. Make sure you are using
a supported telephone line connector.
If using AT Dialing, refer to the Table A-2,
Modem
—
Computer Connection.
If using DTR Dialing, verify that the telephone
number stored in directory location 1 is correct,
and verify that the computer is raising DTR from
Off to ON to initiate a dial.
If the modem does not break dial tone, check
the settings of S11 and S13.
Refer to the
Making a Call with Your Modem
section in Chapter 3,
Using Your Modem, to
verify that you are using the proper command
format.
