14
Minimal Installation for Service Providers
In the following procedures, once the unit is installed and minimal configuration is
completed using the Easy Install feature, the NOC can complete and verify the setup.
Physically Installing the Unit and Setting Up for Remote Access
It is assumed that frame relay service is turned on at the site.
Procedure
1.
Follow Steps 1 through 8 of
Full Installation and Setup
on page 8.
2.
If the DSX-1 interface will be used, install the DSX-1 cable (see
Connecting to DSX
on page 24).
3.
Install the modem cable (see
Connecting the Modem
on page 24).
4.
If the unit is equipped with an ISDN DBM, install the ISDN DBM cable (see
Connecting to ISDN
on page 24).
5.
If you will use the Ethernet port for management, install the Ethernet cable (see
Connecting to Ethernet
on page 25).
6.
Install the DTE cables (see
Connecting to a DTE
on page 25).
Physical installation of the unit is complete; the NOC can now remotely access the unit
for additional configuration.
Содержание iMarc SLV9128
Страница 36: ...36 9128 A2 GN11 70 ...
