8799-A2-GZ40-10
April 2003
13
EIA-530 Payload Rate
Possible Settings:
64, 128
Default Setting: [Highest multiple of 64 Kbps supported by the DSL Line Rate]
When the remote STU-R has an EIA-530-A interface, the Payload Rate set on the STU-C
determines the port speed of the synchronous port of the STU-R. This option is read-only
unless the line rate is 200 Kbps.
Remotely Initiated Loopback
Possible Settings:
Enable, Disable
Default Setting:
Enable
Specifies whether the line card will respond to a loopback command from the endpoint.
Peer IP Address
Possible Settings:
001.000.000.000
– 223.255.255.255, Clear
Default Setting:
000.000.000.000
Specifies the peer IP address for the remote management link.
Circuit Identifier
Possible Settings:
ASCII text field, Clear
Default Setting: [blank]
Uniquely identifies the circuit number of the transmission vendor’s DSL line for
troubleshooting purposes.
Table 1. DSL Interface Options (2 of 2)
