Paradyne HOTWIRE 7900, Руководство пользователя

Страница: 9 / 84

v
7900-A2-GB20-00 March 1998
About This Guide
Document Purpose and Intended Audience
This guide contains information needed to install, configure, and operate the
Hotwire Model 7900 Basic Maintenance Processor (also known as an MTU-M
nest card) for nest-mounted Hotwire 7900 termination units.
It is expected that readers of this document are central office/site (CO) or special
service installation technicians or network engineers who have an understanding
of digital subscriber line systems and High-bit-rate Digital Subscriber Loop
(HDSL) and Symmetric Digital Subscriber Loop (SDSL) transmission systems
plus the deployment of such systems in a telephone company or private network
environment.
Document Summary
Section Description
Chapter 1 About the Hotwire Model 7900 Basic Maintenance
Processor. Describes the features of the Model
7900-F1-500 and typical configurations.
Chapter 2 MTU-M Installation Procedures. Describes how to install the
MTU-M in the Hotwire Model 7900 Nest and connect
multiple adjacent nests.
Chapter 3
Initial Setup Instructions. Provides initial setup instructions
for the MTU-M, including initial IP addressing and system
operational settings.
Chapter 4
System Terminal Interface. Provides procedures for
connecting a VT100-compatible system terminal to the
MTU-M front panel or nest rear panel. This chapter also
provides procedures to access MTU-M functions through a
modem.
Chapter 5
MTU-M Status and Performance Functions. Describes how
to monitor the status and performance of nest card
termination units.