Paradyne HOTWIRE 7900, Руководство пользователя

Страница: 21 / 84

Initial Setup Instructions
3-3
7900-A2-GB20-00 March 1998
Entering Initial System Configuration (Sysconfig)
Parameters
Use the following procedure to set your initial system configuration parameters
from the System Terminal.
NOTE:
Default values are recorded in Appendix B,
Netconfig and Sysconfig Menu
Values . When changing network configurations, it is helpful to first write the
current values down in the table provided in Appendix B .
"
Procedure
To enter initial system configuration parameters:
1. At the MTU-M–> prompt, type m.
The Maintenance menu displays.
2. At the maint–> prompt, type sys.
The Sysconfig menu displays. This screen contains the current system
configuration parameters.
3. At the sysconfig–> prompt, press Enter.
A prompt appears asking you if you wish to change the current values.
4. Type y at the
yes/no
prompt and press Enter.
The system displays the default settings.
5. Type new at the password prompt. You can change your password from the
Netcofig menu.
The changes you make at the Sysconfig menu are stored in a working buffer.
If you make an error or are unsure of your changes, do not save your
changes. The system will return to the previous values.
6. Change Sysconfig values as required. Refer to Changing MTU-M Operational
Parameters (sysconfig) in Chapter 6, MTU-M Maintenance Functions.
NOTE:
When setting system configuration parameters, refer to Additional Sysconfig
Setup Considerations on page 3-4 for an example of how to configure the
Polling Interval and Pollto options.
7. Type q to exit the Sysconfig menu.
8. Type y at the
yes/no
prompt and press Enter to save your changes.