Installation and Setup
2-2
5100-A2-GB21-10
April 1997
Installing the HotWire 5171 Diagnostics Utility
"
Procedure
To install the HotWire 5171 Diagnostics Utility:
1. Insert the HotWire Diagnostics Utility disk in drive A.
2. Enter Windows and:
I f you are using . . .
Select . . .
Windows for Workgroups 3.11 (or later)
File, then Run on the Program Manager
window.
Windows 95
Start, then Run.
3. Type
A:\SETUP.EXE
and click on OK.
4. Follow the screen instructions for installing the software. When the install
program prompts for a destination directory for the Diagnostics Utility, you
can specify a directory or click on Next to accept the default directory.
5. Click on OK when installation completes.
An icon is created for the utility. You can double-click on the icon to start the utility
when needed.
NOTE:
Some Diagnostics Utilities can interfere with network data so the Diagnostics
Utility menus should be open only when configuring or testing the card.
Preparing the Card
For the 5171 PC NIC to operate properly with your PC configuration, you need to
set the following DIP switches:
H
I/O Base Address
H
IRQ setting