4
Installing the Power Supply and Cord
1. Insert the 4-prong plug into the POWER jack.
When inserting the plug at the rear of the FrameSaver NNI unit, align the plug with
the notch above the POWER jack. Make sure the locking tab snaps securely into
the jack.
POWER
COM
NETWORK
DSX-1
98-16122
Power Supply/Cord
Grounded
Power Outlet
Locking
Tab
POWER
COM
OK
ALM
2. Insert the socket end of the power cord into the power supply’s receptacle.
3. Plug the power cord into the grounded power outlet.
Verification Check:
Did any LEDs light?
If yes, the FrameSaver NNI unit has power and is operational.
