10
Setting Up for Management
See
Configuring the Communication Protocol and Configuring SNMP Management
in Chapter 9,
Configuration Options, of the User’s Guide to read about the configuration
options identified in the following procedure.
To set up SNMP management:
1. Select Communication Protocol configuration options.
Configuration Edit/Display
→
Management and Communication
→
Communication Protocol
2. Minimally, enter the following options:
– Node IP Address
– Node Subnet Mask
3. Press Esc once to return to the Management and Communication menu.
4. Select General SNMP Management and press Enter.
5. Minimally, set Name 1 Access to Read/Write.
6. Press Ctrl-a to move the cursor to the bottom of the screen, type s (Save), and
press Enter. The Save Configuration To: prompt appears.
7. Select Current Configuration and press Enter.
8. Press Esc three times to return to the Main Menu.
Proceed to
Setting Up Auto-Configuration on page 11.
