manualshive.com logo in svg

Paradyne FrameSaver DSL 9783 CSU/DSU, Руководство пользователя, Страница: 85 / 233

Поделиться
Скачать
Paradyne FrameSaver DSL 9783 CSU/DSU Скачать руководство пользователя страница 85

Configuration Options

 4-45

9783-A2-GB20-00

July 2000

Table 4-18.

Communication Port Options (4 of 4)

RIP

Possible Settings: None, Standard_out
Default Setting: None

Specifies which Routing Information Protocol (RIP) is used to enable routing of
management data between devices.

Display Conditions – This option only appears when Port Use is set to Net Link.

None – No routing is used.

Standard_out – The device will send standard RIP messages to communicate routing
information about other FrameSaver units in the network. Standard RIP messages
received on this link are ignored.

NOTE:

The router must be configured to receive RIP on the port connected to the
COM port, configured as the management interface (e.g., Cisco:

config-t, router RIP, int serial

x, IP RIP Receive

version 1, ctl-z WR

).

To create this management interface, make sure that Node or COM port IP
Information has been set up (

Configuring Node IP Information

).

Содержание FrameSaver DSL 9783 CSU/DSU










































































































































































































































Отзывы:

Нет отзывов