Paradyne CopperJet 810, Инструкция по установке

Страница: 3 / 4

3
Installing the CopperJet 810 in the Bracket
Procedure
To install the CopperJet 810 in the bracket:
1. Connect all required cables to the CopperJet 810 before installing it in the bracket.
2. Slide the CopperJet 810 upward into the bracket with the faceplate against the
bracket.
3. Slide a cable tie (included) through the loops at the bottom of the bracket.
4. Fasten the cable tie and pull it tight.
02-17321